Hydraulic Test Stand - Medium/Light Aircraft (PN: 116-1D)
Hydraulic Test Stand; electric motor driven, 6GPM at 3000 PSI, for hydraulic system test and check for medium/light helicopters and light aircraft.
Suitable for AW109, AW169, BK117, AB212/412
Hydraulic Test Stand mounted on a trolley (steel structure) equipped with two super elastic wheels, two fwd castor wheels and an hand bar on the back of the equipment for easily handling.
Axial piston type high pressure electric motor driven pump with variable displacement and adjustable working pressure up to 6 GPM at 3000 psi.
High Pressure 3 μ filter on delivery line.
Submerged cartridge suction filter 90 μ.
Stainless Steel reservoir, externally painted, volume 60 litres about, operative capacity 40 litres, equipped with:
• inspection hole
• fluid level visual sight indicator
• drain valve
• filling and drain port
• suction and return port
Sampling port to check the fluid class (according to NAS 1638).
Ambient working temperature: from -20°C to +50°C.
Working fluid: MIL-PRF-5606, MIL-PRF-83282 or MIL-PRF-87257.
On return line the back pressure can be adjusted.
Mechanical relief valve, to pilot the pump compensator for the adjusting of the actual working pressure. The HTS is Dual System (2 completely independent branches, each branch composed by one delivery line and one return line), it is possible to operate with different pressures (with the aid of two pressure reducing valves) on both circuits simultaneously. On return line the back pressure can be adjusted.
H.P. gauge, branch “A”, F.S. 6000 PSI, ∅ 100 mm, accuracy 0,6% f.s., case filled with silicon oil for low temp
H.P. gauge, branch “B”, F.S. 6000 PSI, ∅ 100 mm, accuracy 0,6% f.s., case filled with silicon oil for low temp
L.P. gauge, return pressure, F.S. 160 PSI, ∅ 100 mm, accuracy 0,6% f.s., case filled with silicon oil for low temp
Hour-counter (inside power board)
Fluid level sight indicator with embedded thermometer.
Clogged filter indicator with embedded phase verifier.
Power rating 5.5 kW
Power supply: 220/400Vac/50Hz three-phase + GND, 32A; 200/440Vac/60Hz three-phase + GND, 32A
Standard: power supply cable length 10 m with plug 3P+GND 32A according to CEE17 (CEI23-12); Two H.P. delivery flexible hoses (size 1/2″), two L.P. return flexible hoses (size 3/4″), one drainage flexible hose (Size 1/2″) standard length 6 meters each, optional 8 meters each.
Test stand textile cover, wood crate for transport, O&M manual, CoC, Test report, gauge calibration report and fluid contamination report.
Yellow RAL 1007 standard, other colours on request.