Hydraulic Test Stand Electric Motor Driven (PN: 128-1D / 128-D2)
Hydraulic test stand electric motor driven, 30 gpm at 3000 psi, max operating pressure 4500 / 5150 PSI. Hydraulic system test and check on medium and large helicopters and aircraft.
Hydraulic Test Stand mounted on a steerable trailer (steel structure) equipped with four pneumatic wheels, towing through a tow-bar at the maximum speed of 30 Km/h. Rear wheels are equipped with hand operated drum brake.
Axial piston type, high pressure, electric motor driven pump with variable displacement and adjustable working pressure up to 30 GPM at 3000 psi or 16 GPM at 4500 psi.
High Pressure 2 μ filter on delivery line equipped with differential pressure switch for filter clogged indication.
Low pressure 25 μ filter.
Stainless steel reservoir, volume 150 litres, operative capacity 120 litres, equipped with:
- inspection hole
- oil level sight indication
- drain valve
- filling and drain port
- suction and return port
The HTS may be used with aircraft reservoir or test stand reservoir.
Sampling port to check the fluid class (according to NAS 1638). Ambient working temperature: from -20°C to +50°C. Working fluid: MIL-PRF-5606, MIL-PRF-83282 or MIL-PRF-87257. On request Skydrol fluid.
Proportional electric valve, with by-pass function, to set and control the max working pressure.
Mechanical relief valve, to pilot the pump compensator, for the adjusting of the actual working pressure.
The HTS is Dual System (2 completely independent branches, each branch composed by one delivery line and one return line), it is possible to operate with different pressures (with the aid of two pressure reducing valves) on both circuits simultaneously. On return line the back pressure can be adjusted.
H.P. gauge, branch “A”, F.S. 6000 PSI, accuracy 0,6% f.s., case filled with silicon oil for low temp
H.P. gauge, branch “B”, F.S. 6000 PSI, accuracy 0,6% f.s., case filled with silicon oil for low temp
L.P. gauge, return / booster pressure, F.S. 160 PSI, accuracy 0,6% f.s., case filled with silicon oil for low temp
Flowmeter, LPM or GPM and Thermometer, °C digital indication.
Oil level sight indicator. Clogged filter indicator. Hour-counter.
Power rating: 45 KW.
Power supply: 230/400Vac/ 50Hz, threephases+GND, 125A; 200/440 VAC/60Hz, threephases+GND, 125A
The test stand can be equipped with a Laser Particle Counter (P/N KLP-120), for continuous monitoring the hydraulic fluid, without sampling it, for presence of particles and/or water presence inside the fluid.
Standard: power supply cable length 10 m with plug 3P+GND 125A according to CEE17 (CEI23-12); Two delivery H.P. flexible hoses (size 3/4″ length 10m), two return L.P. flexible hoses (size 1”1/4″ length 10m); one drainage flexible hose (Size 3/4″ length 10m). Test stand textile cover, wood crate for transport, O&M manual, CoC, Test report, gauge calibration reports and fluid contamination report.